Newelectronx Reviews, Rating, and Feedback

I felt very happy to work with these products they are very great tools and I will support these tools .

working for Cox Communications as professional installed you have to know How to unlock cable box outside house and that start with having the right key. as described.

I needed to pull of the base plate of a Cuisinart coffee machine. Without this tool set I would have cleared the tube inside the machine. At first I tried a set of standard and metric Allen wrenches that didn't fit the thing. So you can imagine how happy I was to get the 102 pieces that had the right screwdriver that I needed. Thanks Howard

Thank you for the fast shipping of the Self Lock Security PED Key

Great customer service and fast reply to all questions. I had problem with a clogged tube on my coffee maker - one way valve. The screws for the base plate are security screws. Which are basically star-shaped with a metal post in the middle. Customer service helped me find the correct security bit set with hollow centers. It actually removed the screws! I didn't expect it to be easy, but it was and fun...

since a tiny bit of water was coming through my keurig. I ran a full 50/50 mixture of vinegar and water solution through a modified keurig pod. it took a really long time - longer than normal. Next I dumped a tablespoon of baking soda in the modded pod with another hot vinegar solution, which caused the baking soda to foam and clean nicely. That pod brewed very fast and i thought I got the clog out. Turns out only a portion of the clog came out because the brew slowed down again. I think this all started from using an expired pod? Hmm. Next I opened the keurig with the help of this screwdriver kit. Found a gross portion of molded grounds in a small clear hose. I removed it and blew air through it and watch the greenish-brown slug come out the other end. after reassemble, so i ran the hot vinegar, water, and baking soda solution through again. Followed that with a fresh 50/50 vinegar and water solution through, which was fast and clear - going to to plain water. installed a legit non expired keurig pod and now i have coffee!

Every home owner who owns a Jura should own this screwdriver set. I was having a problem with my Ena 3. From my searching I've found that the problem is likely fine grounds stuck in the chute and that if you open it up you can get at this area from where the fill powder chute connects, but I couldn't figure out how to get the top and side panels off. Someone told me that this screwdriver set had the grinder key to remove the top and sides panels of the Ena3 to get the grounds stuck in the chute. These screwdriver are as advertised and now I would recommend them because I have removed all of the top screws and the logo button on the back, and got to the ground chute to thoroughly clean it out.

for installment of the f port locking terminator we find the Security Sleeve and F Connector Installation Tool a must to avoid breaking satellite and cable enclosure locks. fast shipping, decent price, and great customer service was administered to me while ordering here. thank you.

I searched every where for this screwdriver before finding it here. I've owned a few in the past because we recycle these set top boxes. I couldn't use the previous one I owned in a electric screwdriver, but this one I can. Helps me to get my recycling done twice as fast before. Thanks for the speedy delivery. Larry

Customers say the tool works great and they love the handle

there is 4 screws in the four outside corners that needed a t10 torx screw driver of dcc-1200. after removing them i could see that the water hose got baked onto the heating element. the heating element made the hose brittle when i tried to remove it, the hose crumbled. after opening the 2 phillips screws that hold the heating element to the coffee maker, i turned and twisted the hose until it came off. cut a short piece of replacement hose made of copper to resist heat of the heating element. after de-calcium with CLR and running a few rinse cycles, i got my first cup of coffee and ooooo it tasted so good. like new, thanks to the screwdriver tool kit.

Basically this was need for all the classic video game stuff like Sega systems and their games. And the Nintendo systems NES, SNES, N64 and their games. I have so many bits I can open them all up. I needed this so bad. Awesome!

Very friendly company. They listened and returned with good news. even to a novice with first broken machine can use this tool set. After receiving I took the opportunity to repair my jura, it runs like magic again. no more dirty brew group and I saved a bundle.