Newelectronx Reviews, Rating, and Feedback

we are sent cable boxes to refurbish them for service back into the telecommunication arena. a large client dropped off a ton of DCX3400 Cable boxes, DCX3501 cable boxes, PACE boxes, Xfinity X1series models (PX001ANM and PR150BNM) RNG150 Cable boxes, Comcast internet modems, DCX3200 cable boxes, DCX3200 RNG150 (MR150CNM),DCT700, DCT2244, Comcast Cable boxes, DCT6412 Comcast cable boxes. All of them were in bad condition with severe signs of abuse and damage. After fixing them I reseal the authorization with a seal which tells my client that I have certified the cable box field ready. Very happy to be doing business with yall. Without these little puppies my job would be a little difficult.

seems like you can find cheap cable jerrold j-jacks keys anywhere online these days. I've gone through a few jerrold cable j-keys in the last year. about 15 pieces off ebay. at one time i bought 3 at one time so i wouldn't have to wait on them to arrive. this one i got a few months back from here and the inside teeth still appear in good condition. i have also used the jack key in a low speed hand motorized screwdriver. i mostly use them to recycle old cable tv boxes and descramblers.

there isn't a single right idea for cleaning cartridge based video games in ones collection. in most cases i don't prefer to use solvent of any kind. of course you will need these tools and screwdrivers that is why i ordered them in the first place. my secret for long lasting cleaning on my nintendo cartridges is using two objects once i open the video game case: fiberglass pen and emery boards for women finger nails. the manicurist emery board is good because its a fine sandpaper on stick. gently rubbing it across the contacts removes decades of hardened corrosion. from my electronic experience i learned to clean circuit boards with fiberglass pens. i use this same teaching once i have the video game open to clean out corrosion. very pleased with the nintendo screw driver bits because they allow me to clean how i think cleaning video games should be accomplished.

I bought a MEDIATECH 2200 CABLE DESCRAMBLER BOX off ebay that didn't include a remote control or directions. The remote control that I bought here worked great right out the box, plus it included instructions. I contacted customer service by email and they were friendly - quick with replies and knowledgeable about the remote control and how it could work with the Mediatech 2200 converter box. My experience here was very helpful and they have received my recommendations. good job guys!

my tool got stolen a few weeks back. i ordered this one to replace it. i would have to say the heavy iron of this cable tool is stronger than the original cable security tool that got stolen. the metal is a lot harder and it seems as if it'll last longer. before i had to push inward hard before turning the cable tool inside the lock. i was conditioned to doing this until i mistakenly did it few times with this newer key. i was surprised that i didn't see any strip marks. that's how i knew i got a quality cable tool.

i wasn't sure what to expect. it was inexpensive, but i am 100% impressed with the fast shipping and the fact that it actually works.

so that we don't have to break locks, we use the right tool to unlock the cable box on the outside of the houses.

the perfect pedestal tool. thanks for the fast shipping. it does what it is meant to do. as described.

I needed this tool set to open up the game cube. i repair allot of consoles and i was searching for something small and portable that could open the game cube and other consoles like game gear, nes, snes, 64 cartridges and consoles. this is the best tool kit to fit video games. comes standard with the 3.8mm for cartridges - and the 4.5mm for video game consoles; and probably the cheapest priced one too.

I have a espresso machine with integrated grinder. I was having dripping problem with my Ena 5. It dripped so slow and that I would only get a tea spoon of coffee. Not easy to pick it up and turn it upside down to shack out coffee grounds. Ordering this key saved it. I cleaned out the grinder and now the machine is back to normal.

I own a Nespresso Maestria and i tried everything to get it working again. i descale yearly as per the Nespresso instructions. I tried 2 sachets of Nespresso descaling solution, distilled vinegar, CLR, and a desert spoonful of Citric Acid granules - nothing worked. It wasn't until I opened the compartment side panels and saw that the brewing mechanism was horribly populated with calcium build up. I could have ran several descaling rinses and never scratch the service. With the machine open I was able to get most of it, if not all of it cleaned out. Thanks for the quick ship. Good job. Coffee and espresso will be severed now!

About a month ago we bought this tool because it started with grounds stuck in the nespresso grinder. We had a bit of an accident in our kitchen. I needed to empty the grounds in our nespresso, and used an old bag of coffee beans. Before I got a chance to clean up, my girlfriend then poured the used grinds in to the nespresso. she and i tried cleaning it out as best we could, used a mini vacuum - picking it out by hand one at time - shaking - pounding - scrapping etc, and still the nespresso says - fill with beans, when its already full, and just makes a weird noise when you try and make espresso or coffee. buying this tool helped me to really give the nespresso a good cleaning. my girlfriend and i would like to thank you so much. this is a good product.